1923 4hp motorcycle

Lets talk bikes

1923 4hp motorcycle

Postby g15mk11 » Fri May 12, 2017 3:28 pm

Hi does anyone have any ignition timing info on a rover 1923 500cc motorcycle
g15mk11
 
Posts: 2
Joined: Thu Sep 22, 2016 8:14 pm

Re: 1923 4hp motorcycle

Postby jp928 » Mon Jul 03, 2017 8:26 am

I have a book on the 4hp engine, but its undated, so not sure if its relevant. It came from british-motorcycle-parts.com.
On timing its vague. Basically, there is a gauge rod lowered through where the compression lowering tap goes; set advance/retard to fully advanced; turn over until inlet valve is closed, and mark on gauge rod shows level with cylinder head boss; set magneto so points are about to open. Sounds like the gauge rod is needed. Another approach I have see is to set advance/retard to fully RETARDED at TDC.
hth
jp 26 Rover 9
jp928
 
Posts: 45
Joined: Fri Aug 02, 2013 6:44 am


Return to Rover bicycles and motorcycles

Who is online

Users browsing this forum: No registered users and 1 guest

cron